Common questions on product selection, technical consulting and export process
Standard products start at one 40ft container; for custom products the MOQ is agreed by specification, usually from two containers.
Stock items ship within 3-5 working days; custom products take 15-20 working days, depending on order volume and the production schedule.
Yes. Thickness (5-25 mm), length and width, and special shapes can be made to customer drawings. Detailed specifications and technical requirements are needed.
Quanhe waterproof backer board has a water absorption of ≤0.5%, far below ordinary cement board (typically 3-10%). It does not swell or deform after prolonged water exposure, and its higher flexural strength makes it less prone to damage during handling and installation.
Yes. A4-size samples in standard specifications are free of charge; international courier freight is collect. Samples are dispatched within 3 working days.
Each batch is tested for water absorption, flexural strength and dimensional deviation, and a COA test report is issued.
The tested sample (model 120kg/m³-Φ76×50×1000mm) measured 0.043 W/(m·K) @70℃, per commissioned test report J25D09682632BR (Shenzhen Jinglian, CNAS L18543). This is the tested value of the sample, not a guarantee for the full product line.
The tested sample achieved Class A (A1, non-combustible) per GB 8624-2012, suitable for fire-sensitive building and industrial piping.
This commissioned test report did not measure the upper service temperature limit. The temperature rating depends on the specific model and GB/T 11835; please share your operating temperature so our technical team can confirm the selection.
The report lists models 48/60/89/108/133mm×50mm etc., with the main tested size Φ76×50×1000mm. Custom sizes by pipe outer diameter are supported; contact sales for MOQ and lead time.
The tested sample (model 45kg/m³-Φ76×50×1000mm) measured 0.042 W/(m·K) @70℃, per commissioned test report J25D09682633BR (Shenzhen Jinglian, CNAS L18543). This is the tested value of the sample, not a guarantee for the full product line.
The tested sample achieved Class A (A1, non-combustible) per GB 8624-2012.
This commissioned test report did not measure the upper service temperature limit. Glass wool pipe sections are typically used for low-to-medium temperature piping (e.g. HVAC, chilled water); for high-temperature duty, rock wool or ceramic fiber pipe sections are recommended.
The report lists models 48/60/89/108/133mm×50mm etc., with the main tested size Φ76×50×1000mm. Custom sizes by pipe outer diameter are supported; contact sales for MOQ and lead time.
The tested sample measured 0.139 W/(m·K) at a test temperature of 500℃ (board sample), per commissioned test report JXT2026253136 (Guangdong Junxin, CNAS L24868).
No. 500℃ is the thermal-conductivity test temperature of a board sample, not the service temperature limit of the pipe shell. The actual service temperature depends on the specific model and GB/T 16400; do not claim "withstands 500℃".
The tested sample achieved Class A (A1, non-combustible) per GB 8624-2012, suitable for medium-to-high temperature industrial piping.
The report lists models 48/60/89/108/133mm×50mm etc., with the main tested size Φ76×50×1000mm. Custom sizes by pipe outer diameter are supported; contact sales for MOQ and lead time.
The tested sample (model Φ89×50×1000mm) measured 0.024 W/(m·K) @25℃, the lowest among the four pipe sections, per commissioned test report J25D569348374BR (Shenzhen Jinglian, CNAS L18543).
PUR is a low-temperature insulation material with a long-term service temperature not above 70℃ (tested point 70℃/-30℃, dimensional change qualified). It is NOT suitable for high-temperature steam or furnace duty, and must not be labeled "high-temperature resistant". Confirm by your actual medium temperature when selecting.
The tested sample measured compressive strength 197kPa, closed-cell rate 85.5%, and oxygen index 30.5%, all meeting relevant standards, indicating good structural strength and vapor-barrier performance.
The report lists Φ76×40, Φ89×50, Φ159/219/377/426×50~80 and board 1000×500×50mm etc., with the main tested size Φ89×50×1000mm; often combined with HDPE jacket pipe as prefabricated directly-buried insulation pipe. Contact sales for MOQ and lead time.
Still have questions? Our team is here to help.
Contact Us